Lenovo 5248 - Manual (Page 32)

4. Pull the handle 1 of the hard disk drive bracket upward and then slide the hard disk drive outward to
remove it from the hard disk drive bay.
Figure 16. Removing the hard disk drive
5. Flex the sides of the hard disk drive bracket properly to remove the hard disk drive out of the bracket.
6. To install the new hard disk drive into the bracket, flex the bracket and align pin 1 , pin 2 , pin 3 , and
pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board 5 on the bottom of the hard disk drive.
Figure 17. Installing the hard disk drive into the bracket
24 ThinkCentre User Guide