Life Fitness 880 - Manual (Page 31)

31
STEP 35:
FIGURE 35
• Route the WEIGHT STACK CABLE (48) around one 4-1/2” PULLEY (43) and assemble the PULLEY to the BOOM BRACKET (8)
using one 3/8 X 3-3/4” BOLT (93), two 3/8 X 1” SPACERS (57), and one 3/8” LOCK NUT (82). See FIGURE 35.
44
48
82
57
3/8 X 3-3/4” 93
8
• Screw the threaded end of the WEIGHT STACK CABLE (48) into the end of the FLOATING PULLEY BRACKET (16) .
16
STEP 36:
FIGURE 36
• SECURELY assemble two 2” NYLON SPACERS (119) to the BOOM BRACKET (8) using two 3/8 X 2-3/4” BOLTS (90) and two
3/8” LOW HEIGHT LOCK NUTS (83) as shown in FIGURE 36.
119
90 3/8 X 2-3/4”
8
83