Lincoln IMPINGER 1200 - Manual (Page 2)

Impinger I – 1000 Series Ops Manual 2
WARNING AND SAFETY INFORMATION
IMPORTANT
· Obtain from your local gas provider and post in a prominent location instructions to be followed in the event gas
odors are detected.
· It is required that the oven be placed under a ventilation hood to provide for adequate air supply and ventilation.
· Minimum clearances must be maintained from all walls and combustible materials. See spacing instruction on
Page 7.
· Keep the oven free and clear of combustible material.
· Adequate clearance for air openings to the combustion control chamber on both sides of the oven is required.
· Do not obstruct the ventilation holes in the control panels, as these provide the combustion air for the burner and
cooling air for the controls.
· The oven is to be operated only on the type of gas and/or electricity as shown on the specification plate.
· The power burner will not operate and gas will not flow through the burner without electrical power.
· This manual should be retained for future reference.
· The electrical wiring diagram is located under the control box covers.
WARRANTY
Lincoln Foodservice Products, LLC warrants to the original purchaser for use of each new Impinger  Conveyor
Oven as follows: any part which proves to be defective in materials or workmanship within the warranty period will,
subject to the terms of this warranty, be repaired or replaced at Lincoln’s option. Repair or replacement is to be
done by the assigned Lincoln Authorized Service Agency. Any claims under this warranty must be presented in
writing to Lincoln through the assigned Authorized Service Agency promptly and within the warranty period.
For ovens installed in the United States and Canada, defective parts of the original equipment are warranted for
one year from the date of the “START-UP CHECKOUT” and the cost of repair or replacement labor shall be at the
expense of Lincoln Foodservice Products, LLC for one year from the date of the “START-UP CHECKOUT.
(START-UP CHECKOUT must occur within 24 months of manufacturing date for warranty to be in effect.)
For ovens installed in locations other than the United States or Canada, defective parts of the original equipment
are warranty for one year from the date of “START-UP CHECKOUT and the cost of repair or replacement labor
shall be at the expense of Lincoln Foodservice Products, LLC for 90 days from the date of “START-UP
CHECKOUT”. (START-UP CHECKOUT must occur within 24 months of manufacturing date for warranty to be in
effect.)
Warranty shall not apply if the oven(s) are started up and operated prior to the utilities and oven(s) having a
“START-UP CHECKOUT” performed by an Authorized Service Technician or a Lincoln Foodservice Products, LLC
Service Representative. Also, this warranty shall not apply if the oven or any part is subjected to accident, casualty,
alteration, misuse, abuse, faulty installation, or if the date of manufacture is altered or removed.
The obligation of Lincoln Foodservice Products, LLC is limited to the above and except as expressly stated herein.
Lincoln Foodservice Products, LLC makes no guarantee or warranty, express or implied, including without limitation
warranties of fitness of merchant ability with respect to Impinger
 Conveyor Oven and Lincoln Foodservice
Products, LLC has no other liability with respect thereto including without limitation, liability for incidental, special, or
consequential damages.
The following items are not covered by warranty: Any item that is defective because of utility services (power
surges, high and low voltage, high or low gas pressure or volume, or improper connections); conveyor belt;
replacement fuses, bulbs, gaskets, and motor brushes; adjustments and calibrations for temperatures, speed and
air flows.
FOR YOUR SAFETY, DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS OR LIQUIDS
IN THE VICINITY OT THIS OR ANY OTHER APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.
WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN
CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING, AND
MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.