Figure 16, Step 16 – Life Fitness FIT SERIES User Manual
Page 16
Advertising
FIGURE 16
STEP 16:
16
Thank you for purchasing the LifeFitness FIT SERIES LEG PRESS/CALF. If unsure of proper use of
equipment, call your local LifeFitness distributor or call the LifeFitness customer service department at
(800) 351-3737.
33
41
40
42
31 3/8 X 25mm BUTTON HEAD
1
• SECURELY assemble the TOWER CAP (40) to the TOWER (1) using two 3/8 X 25mm BUTTON HEAD BOLTS (31) and two 3/8”
BLACK FLAT WASHERS (33) as shown above.
• SECURELY assemble the FRONT SHROUD (41) and the REAR SHROUD (42) to the TOWER (1) using twelve 3/8 X 90mm BUTTON
HEAD BOLTS (32), twenty-four 3/8” BLACK FLAT WASHERS (33) and twelve 3/8” ACORN NUTS (43) as shown above.
43
32 3/8 X 90mm BUTTON HEAD
SERIAL # LOCATION
Advertising