Lathem PC3500TX - Manual (Page 14)

10 - PC3500TX Terminal Installation & User’s Guide
♦ Press the ENTER key. The following message will be displayed:
TERMINAL IP ADDRESS
###. ###. ###. ###. _ _ _
This is the PC3500TX’s unique IP address. This must be a “Static” IP address that
will be assigned by the network administrator.
Enter the terminals numeric IP address in blocks of three followed by the ENTER
key. Once all four segments are entered the following message will be displayed:
HOST IP ADDRESS
###. ###. ###. ###. _ _ _
This is the Host’s (PC that is running the Terminal Manager Module) unique IP
address. (See your network administrator for assignment.)
Enter the host’s numeric IP address in blocks of three followed by the ENTER key.
Once all four segments are entered the following message will be displayed:
NETWORK MASK
###. ###. ###. ###. _ _ _
This is the Subnet Mask. (See your network administrator for assignment).
Enter the numeric Subnet Mask address in blocks of three followed by the ENTER
key. Once all four segments are entered the following message will be displayed:
HIT ENTER IF DEFAULT
ROUTE REQUIRED
If a Router or Gateway is required press the ENTER key. The following message will be
displayed:
ROUTER IP ADDRESS
###. ###. ###. ###. _ _ _