Lenovo 6435 - Manual (Page 56)

Table 4. Abbreviated list of POST error codes (continued)
v Follow the suggested actions in the order in which they are listed in the Action
column until the problem is solved.
v See the parts listing in the Hardware Maintenance Manual to determine which
components are customer replaceable units (CRU) and which components are field
replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must
be performed only by a trained service technician.
Error code Description Action
00012000 Processor machine check error.
1. (Trained service technician
only) Reseat the
microprocessor.
2. Replace the following
components one at a time, in
the order shown, restarting the
server each time:
a. (Trained service technician
only) Microprocessor
b. (Trained service technician
only) System board
00019701 Microprocessor x is not functioning
or failed the built-in self-test.
Make sure that microprocessor x is
installed correctly. If the problem
remains, call for service.
01298001 No update data for microprocessor
1.
1. Update the BIOS code again
(see the Hardware
Maintenance Manual on the
ThinkServer Documentation
DVD.
2. (Trained service technician
only) Reseat the
microprocessor.
3. (Trained service technician
only) Replace the
microprocessor.
01298101 Bad update data for
microprocessor 1.
1. Update the BIOS code again
(see the Hardware
Maintenance Manual on the
ThinkServer Documentation
DVD).
2. (Trained service technician
only) Reseat the
microprocessor.
3. (Trained service technician
only) Replace the
microprocessor.
42 ThinkServer RS110 Types 6435, 6436, 6437, and 6438: Installation Guide