LSI 7102XP-LC - Manual (Page 31)

Physical Characteristics 2-13
Copyright © 2002 - 2005 by LSI Logic Corporation. All rights reserved.
2.8.4 LSI7102LXP-LC Connector and Indicator LED
The LSI7102LXP-LC I/O bracket is configured as shown in Figure 2.4 .
The LC connector provides the connection from the adapter channel to
the FC subsystem. The indicator LED indicates link status, activity, and
link fault.
Figure 2.4 LSI7102LXP-LC Connector and Indicator LED
Table 2.8 describes the LSI7102LXP-LC Link Activity/Link Fault LED
appearance that indicates a valid link, presence of link activity, or a fault
on the link.
Table 2.8 LSI7102LXP-LC Link Activity/Link Fault LEDs
Link Activity Fault
LED Appearance Off Green Blinking Yellow
Port 0 LED
Port 0