LevelOne 4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000B - Manual (Page 123)

- 123 -
Disk Configuration/ RAID Configuration
English Display Status Description
Ready The status of current disk or disk configuration is normal
Unmounted Hard disk is not installed or hard disk configuration is
not configured
Not Active RAID configuration is damaged and cannot be enabled
When this message is shown, users should back up
disk data immediately and replace the failed disk.
Uninitialized
Initialization fails
Single disk does not support hot swap. If the hard
disk is unplugged when GNS-8000B is turning on,
disk configuration will be damaged and will lead to
data loss.
In degraded mode A disk of RAID 1 or RAID 5 configuration is unplugged or
fails. RAID data protection mechanism fails.
In this situation, users should back up disk data
immediately and replace the failed disk to rebuild
RAID configuration.
Note:
1. When R/W error is displayed for hard disk status, or “Not active” or “In
degraded mode” is displayed for RAID configuration, please replace the hard
disk immediately to ensure RAID data protection can work properly.
LEVELONE is not responsible for any data loss caused by delay in replacing
failed disks in a RAID configuration by users intentionally or unintentionally.
2. LEVELONE Systems, Inc. guarantees that all GNS-8000B (GNS-8000B)
released have passed strict and complete QA test and can operate properly in
normal condition. LEVELONE offers conditional and limited maintenance for
GNS-8000B within warranty period. However, LEVELONE disclaims the
responsibility for any data loss or damage, or business loss of users. In no
event shall the liability of LEVELONE exceed the price paid for the product
from direct, indirect, special, incidental, or consequential software, or its
documentation.