LevelOne 4-bay Sata NAS w/2 Gigabit Ethernet GNS-8000B - Manual (Page 40)

- 40 -
NTP Server
You can enable or use specified NTP (Network Time Protocol) server to
update the date and time of the system automatically. To enable NTP server,
please enable Configure NTP server or client setting and enter the IP
address or domain name of the NTP server, e.g. time.nist.gov,
time.windows.com in Use the specified NTP server field. Then enter the
time interval for adjusting the time (minimum value is 1 minute and
maximum value is 99 days).
To enable multiple NTP servers, you can select Enable NTP server and enter
the IP address or domain name of the servers. You can enter 3 NTP servers
at maximum. If the system fails to connect to the first NTP server, it will try
to connect the second one automatically, so on so forth.
You can click Test to try to connect to the NTP server. If there is no specified
IP address for the NTP server, the system will refer to internal clock for date
and time settings.
Note: The first time you enable NTP server, it may take several
minutes for time synchronization before the time is correctly adjusted.