Linksys SLM224G4S - Manual (Page 15)

9
Installation Chapter 4
24/48-Port 10/100 + 4-Port Gigabit Resilient Clustering Smart Switch with 2 Combo SFPs
How to Use the Console Interface
The Console Interface consists of a hierarchical series of
menu screens and settings screens. Each menu displays
a list of options. Selecting an option brings up a settings
screen where you can configure the relevant settings.
To select a menu option, either press the number of the
option in the list (for example, press  to select Help from
the Main Menu), or use the arrow keys to move up or down
the list until the option is highlighted, then press Enter.
The lower portion of each settings screen lists the actions
and navigation keys. The actions (Edit, Save, Quit) allow
you to make changes to the settings. The navigation keys
(Arrow Keys, Tab, Backspace, Space, Esc) allow you to
highlight and select different items within the screen.
To change a setting, highlight Edit, then press Enter. Use
the arrow keys to highlight the setting to be changed,
then enter its new value (or press Space to toggle through
the list of values). To save your changes and remain in the
settings screen, highlight Save, then press Enter. To return
to the previous screen, highlight Quit, then press Enter.
To cancel all changes and return to the previous screen,
press Esc, then select Quit.
Login
The console interface starts by displaying the Login screen.
The first time you open the console interface, use the
default username admin and leave the password blank,
then press the Enter key. You can set a password later
from the User and Password Settings screen.
Console Login Screen
If you are using HyperTerminal, enter the username and
password at the prompts. Then press Enter to log in.
If you are using telnet, use the arrow keys to select Edit
and press Enter. Enter the username and password in the
respective fields. Then press Esc to return to the Login
screen. Use the arrow keys to select Execute and press
Enter to complete the login process.
Switch Main Menu
After successful login, the Main Menu screen appears. This
screen displays six menu choices: System Configuration
Menu, Port Status, Port Configuration, System Mode, Help,
and Log Out.
Main Menu
System Configuration Menu
System Configuration Menu
The System Configuration Menu provides the following
options:
System Information
Management Settings
User and Password Settings
Security Settings
IP Configuration
File Management
Restore System Default Settings
Reboot System
Stack Configuration
0. Back to Main Menu
1.
2.
3.
4.
5.
6.
7.
8.
9.