Linksys SLM224G4S - Manual (Page 16)

10
Installation Chapter 4
24/48-Port 10/100 + 4-Port Gigabit Resilient Clustering Smart Switch with 2 Combo SFPs
System Information
From the System Information screen you can check current
firmware versions and other general switch information.
System Information
Versions
The Versions screen displays version-related information
for each switch in the system.
Versions
Unit The unit number of the switch, from 1 to 6.
Status The status of the switch, either master or slave.
Software Version The version number of the software .
Boot Version The version number of the boot file.
Hardware Version The Switch’s current hardware setup.
General System Information
The General System Information screen displays the System
Description, System Up Time, System MAC Address, System
Contact, System Name and System Location.
General System Information
Management Settings
The Management Settings screen displays the Serial Port
Configuration option.
Management Settings
Serial Port Configuration
The Serial Port Configuration screen displays the current
baud rate setting. To change the baud rate, select Edit,
then use the spacebar to toggle through the different
baud rates. Use the Save action to set the new baud rate.
Serial Port Configuration
User & Password Settings
The User & Password Settings screen displays all the user
accounts defined on the system.
User & Password Settings
The default account is admin. You cannot edit this account
(its user name and password cannot be changed). For
security purposes, Linksys recommends creating at least
one user account with a unique user name and password.
You can create up to five user accounts total.