Lantronix Device Server MSS 485 - Manual (Page 36)

Device Installer
Flush Output Buffer (Network to Serial)
With Active Connect Select Yes to clear the output buffer with a connection that is initiated
from the device to the network. The default is No.
With Passive Connec Select Yes to clear the output buffer with a connection initiated from the
network to the device. The default is No.
At Time of Disconnect Select Yes to clear the output buffer when the network connection to or
from the device is disconnected. The default is No.
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
3.7.1 Connection Settings - TCP
To configure a channel’s TCP settings:
1. On the main menu, click Connection. The Connection Settings window for the channel displays.
3-14 NET485 User Guide