LSI MiniHAB 44929LO - Manual (Page 15)

Detailed Installation Procedure 1-5
Rev. 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved.
Figure 1.1 Hardware Connections for the LSI Logic Host Adapter
Step 7. Carefully insert edge connector J1 (see Figure 1.1 ) of the host
adapter into the PCI slot.
Make sure the edge connector is properly aligned before
pressing the board into place as shown in
Figure 1.2 . The
bracket around connector J2 should fit where you removed the
blank panel.
SFF Optical
Connector
Fibre Channel
Link Activity/
Link Fault LED
PCI Bus Edge Connector J1
LSI Logic Host Adapter