LSI MiniHAB 44929LO - Manual (Page 27)

Physical Characteristics 2-11
Ver. 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved.
2.6.4 LSI40919LO Connector and Indicator LED
The LSI40919LO I/O bracket is configured as shown in Figure 2.4 . One
LC connector is used to connect the adapter channel to the Fibre
Channel subsystem. The indicator LED is used to indicate link status,
activity, and link fault.
Figure 2.4 LSI40919LO Connector and Indicator LED
Table 2.6 Link Activity/Link Fault LED - LSI40919LO
Link Activity Fault
Appearance of LED
Off Green Blinking Yellow
Channel 0 LED
Channel 0