Lexmark C520 User Manual
Page 48
Loading the standard tray
48
Loading media
2
Squeeze the width guide tabs together as shown, and move the width guide to the side of the tray.
3
Squeeze the length guide tabs together as shown, and slide the length guide to the correct position for the size of
paper being loaded. For setup, load Letter or A4 based on the standard size for your country or region. Notice the
size indicators on the bottom of the tray on both sides of the guide. Use these indicators to help position the guide
at the correct size. Notice the load lines on the width guide tab which is the maximum height indicator for loading
media.
4
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the media. Straighten the
edges on a level surface.
Load
lines