La Crosse Technology WS-1510-IT - Manual (Page 13)

49
2. Press MIN/ MAX to view older records. Press MIN/MAX and
PLUS key to view "Previous" and "Next" record respectively. The
records are made at 3-hour intervals)
Press the SET key to see items normally viewed in “mode 2”.
- Forecast Icons
Forecast Icon Shows Incorrect Conditions
This feature indicates what the weather may be like 12 hours into the
future and not what is happening right now. The weather forecasting
feature is estimated to be 75% accurate. The weather forecast is based
solely upon the change of air pressure over time; creating a necessity to
disregard all weather forecasting for about 24 hours after the unit has
been set-up, reset, or moved from one altitude to another (i.e. from one
floor of a building to another floor). In areas where the weather is not
affected by the change of air pressure, this feature will be less accurate.
To adjust forecast settings see section 2.
What Do the Sun/Clouds/Rain Icons Indicate?
Three possible weather icons will be displayed:
Sunny
-indicates that the weather is expected to improve (not that the
weather will be sunny).
Sun with Clouds-
indicates that the weather is expected to be fair (not
that the weather will be sunny with clouds).
Clouds with Rain
-indicates that the weather is expected to get worse
(not that the weather will be rainy).
Forecast Icon is Blinking
Occasionally the word “tendency,” the up (or down) arrow, and the
clouds or sun will become animated. This is a visual indication that
there has been a recent/sudden change in the weather conditions.
Generally, this is the result of a fast low front coming in.
– Display Information
Entire Display is Blank
Batteries: If your weather station has a blank display, it is generally a
power issue. Please be sure you are using good alkaline batteries
dated at least six years in advance. Remove the batteries from the unit,
press the SET button 20 times to clear any electricity, and install good
alkaline batteries.
Segmented Numbers
If your weather station has missing segments on numbers or letters, it is
generally a power issue. Please be sure you are using good alkaline
batteries dated at least six years in advance. Remove the batteries
from the unit, press the SET button 20 times to clear any electricity, wait
10 minutes with batteries out. Then install good alkaline batteries.
Display Has Black “ink blob” on it.
50
If your screen has black on it that may look like and ink blob, this is
likely do to the display unit falling or being impacted in some way.
Unfortunately, this is not a warranty issue.
– Power Source
Battery Leakage
Battery leakage is not a warranty issue. We recommend you contact the
battery manufacturer if this occurs.
Prevention: Be aware of expiration dates. Do not mix old and new
batteries.
Store batteries at room temperature or allow coming back to room
temperature before using.
Remove weak batteries from you device to prevent leakage.
All rights reserved. This handbook must not be reproduced in any form, even in
excerpts, or duplicated or processed using electronic, mechanical or chemical
procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this
handbook is regularly checked and corrections made in the next issue. We accept
no liability for technical mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.