La Crosse Technology WS-1510-IT User Manual

Page 7

Advertising
background image

25





2.

Max outdoor temperature with the date and time of recording

3.

Min dew point temperature with the date and time of
recording


















4.

Max dew point temperature with the date and time of
recording

5.

Min outdoor humidity with the date and time of recording

6.

Max outdoor humidity with the date and time of recording

















MIN icon

MIN icon

Time and date
of recording

MIN dew point
value

MAX icon

MAX outdoor
humidity value

Time and date
of recording

26

7.

Min Wind chill temperature with the date and time of
recording























8.

Max Wind chill temperature with the date and time of
recording

9.

Min Relative pressure with the date and time of recording

10. Max Relative pressure with the date and time of recording

















11. Maximum wind speed with the date and time of recording

MIN icon

MIN wind chill

value

Time and date
of recording

MAX icon

MAX relative

pressure value

Time and date

or recording

27

























12. Maximum Gust with the date and time of recording





















13. Max 24 hour rainfall with the date and time of recording

MAX icon

MAX wind
speed value

Time and date
of recording

MAX icon

MAX wind gust
value

Time and date
of recording

28




























RESET THE MAXIMUM AND MINIMUM WEATHER DATA

To reset the aforementioned maximum or minimum weather data 1. to
13., you shall need to reset each of the data independently.
1.

Press MIN/MAX key to show the desired weather data. For
instance, if you want to reset the minimum humidity, in the normal
display you shall press the MIN/MAX key three times to show the
min humidity value.

2.

Press and hold the SET key for about 2 seconds, then the
"RESET" icon will appear at the bottom part of the LCD.

3.

Press the + key once, then the stored value will be reset to the
current value and current time.

4.

Press the ALARM key to return to normal display mode.

14. Total rainfall amount
The total rainfall measurement is displayed in the fourth section of the
LCD, in the unit of mm or inch. It shows the total rainfall accumulated
since last reset of the weather station.
In normal display mode, press the MIN/MAX key fourteen times to show
the total rainfall value. The "RESET" icon will also be shown at the
same time.



24h rainfall value

MAX icon

Advertising
This manual is related to the following products: