La Crosse Technology WS-1510-IT - Manual (Page 3)

9
SET key
• Press and hold to enter manual setting modes: LCD contrast,
Manual time setting, 12/24 hour time display, Calendar setting, ºF/
ºC temperature unit, Wind speed unit, Rainfall unit, Pressure unit,
Relative pressure reference setting, Weather tendency threshold
setting, Storm warning threshold setting and Storm Alarm On/ Off
setting
• Press to toggle between the display of Mode 1 or Mode 2:
Mode 1:
"Wind speed + outdoor temp + rel. pressure"
Mode 2: "Gust + Dew Point temp + rainfall"
(Mode 2 displayed will be shown for 30 seconds. Then it will
return to normal display automatically.)
• In normal display mode, press and hold to switch on/ off the
Buzzer
• In the weather alarm setting mode, press and hold to adjust
different alarm value and switch the alarm On/ Off
• Press to activate the reset mode when max or min record is
shown
• Stop the alarm during the time alarm or weather alarm ringing
+ key
• In display Mode 1, press to toggle between the display of Preset
alarm time, date, weekday + date, Indoor temp, or second in the
time display
• In display mode 2, press to toggle between the display of Rel.
Pressure, 24 hour rainfall and Total rainfall
• Press to adjust (increase) the level of different settings
• Stop the alarm during the time alarm or weather alarm ringing
• Press to confirm to reset the max/min record
HISTORY key
• Press to display the weather data history records
• Stop the alarm during the time alarm or weather alarm ringing
• Press to exit manual setting mode and alarm setting mode
ALARM key
• Press to enter the time alarm and weather alarm setting mode
• Confirm particular alarm setting
• Press to exit the manual setting mode
• Stop the alarm during the time alarm or weather alarm ringing
• Press to exit max/ min record display mode
MIN/MAX key
• Press to display minimum and maximum records of various
weather data
• Press to adjust (decrease) the level of different settings
• Stop the alarm during the time alarm or weather alarm ringing
LCD SCREEN
10
Air pressure
histogram
The LCD screen is split into 5 sections displaying the following
information:
1.
Time and date/ indoor temp/ second
2. Wind data
3. Outdoor temperature, Dew point and humidity,
4. Air pressure, Rainfall data,
5. Air pressure history and Weather forecast icon.
* When the signal from the transmitter/ or Rain sensor is successfully
received by the Weather Station, this icon will be switched on. (If not
successful, the icon will not be shown on the LCD). User can therefore
easily see whether the last reception was successful (“ON” icon) or not
(“OFF” icon). On the other hand, the short blinking of the icon shows
that a reception is being done at that time.
Outdoor temperature
or dew point
in °F or ºC
Wind direction
display and wind
speed in Beaufort
scale
Calendar display
Weather tendency
indicator
Time display
Time alarm icon
Outdoor relative
humidity in %
Weather forecast
icon
Relative air pressure
display in inHg or
hPa, or total and 24h
rainfall display in inch
Wind speed or
gust in mph, km/h
Wind Chill
in F or
C
Wind speed Hi
alarm icon
Outdoor Humidity
alarm icon
Outdoor temp.
alarm icon
Low battery Indicator (rain sensor) Low battery Indicator (Thermo-hygro)
Buzzer off indicator
Transmitter signal
reception icon
Low battery Indicator
(weather center)
11
*In normal display user may press the SET key shortly to toggle
between Mode 1 and Mode 2 display:
Mode 1 : Wind speed, outdoor temperature and relative pressure
reading are shown.
Mode 2 :
Wind Gust, Dew Point temperature and 24 Hour and Total
Rainfall reading are shown.
MANUAL SETTING:
The following manual settings can be changed once the SET key is
pressed and hold for about 3 seconds:
• LCD contrast setting
• Manual time setting
• 12/24 hour time display
• Calendar setting
• °F/ °C temperature unit setting
• Wind speed unit
• Rainfall unit setting
• Air pressure unit setting
• Relative pressure reference value setting
• Weather tendency threshold value
• Storm warning threshold value
• Alarm On/ Off setting
LCD CONTRAST SETTING
Wind gust icon
Dew point icon
Rainfall icon
In Mode 2, this
reception icon is
showing the condition
of the reception of the
signal from Rain
sensor
Flashing
Wind speed icon
Outdoor temp
icon
Rel Pressure
icon
In Mode 1, this reception
icon is showing the
condition of the
reception of the signal
from Thermo-hygro
transmitter
12
"Date. Month." (for 24h time display)
"Month. Date." (for 12h time display)
Année
The LCD contrast can be set within 8 levels, from "LCD 1" to "LCD 8"
(default setting is LCD 5):
1. Press
the SET key, the contrast level digit will start flashing.
2. Use the + or MIN/MAX key to adjust the level of contrast.
3. Confirm with the SET key and enter the MANUAL TIME
SETTING .
MANUAL TIME SETTING:
You then may manually set the time of the clock by following the steps
below:
1. The hour digit will start flashing.
2. Use the + or MIN/MAX key to set the hour.
3. Press the SET key to switch to the minutes. The minute digit will
start flashing.
4. Use the + or MIN/MAX key to set the minute.
5. Confirm the time with the SET key and enter the 12/24 HOUR
TIME DISPLAY SETTING
.
12/24 HOUR TIME DISPLAY SETTING:
The time can be set to view as 12-hour or 24-hour format. The default
time-display mode is 12-h. To set to 24-h time display:
1. Use
the + or MIN/MAX key to toggle the value.
2. Confirm with the SET key and enter the CALENDAR SETTING.
CALENDAR SETTING:
The date default of the Weather Center is 1. 1. of year 2005. The date
can be set manually by proceeding as follows.
1.
The year digit starts flashing.
2. Use the + or MIN/MAX key to set the year. The range runs from
"00" (2000) to "99" (2099).
3. Press the SET key to confirm the year and enter the month setting.
The month digit will start flashing.
Minutes flashing
Hour
flashing
Digit flashing