Lexmark 302 User Manual
Page 48
Advertising
5. Close the access cover. Then close the paper door by pulling it
out and pushing it down until it latches.
6. To align the top of form position, follow these steps:
a. Turn the power On (|) and wait for the power-on sequence to
complete (see “Power-On Test” on page 2-3).
b. Press Stop.
The printer displays
and then may display
Ignore this message until you have attached the printer to
your computer. (Press Stop to turn off the alarm, if
necessary.)
NOT READY
<A>
|
29 LINK ERROR
1-26
User’s Guide Model 302
Advertising