Lexmark 302 User Manual
Page 87
9. Compare your printout with the sample printout.
Did the lines print and is the remainder of the printout clear and
readable?
If
YES, go to Step 10.
If
NO, do the following:
a. If any of the following items are not installed correctly, the
printer can experience forms jamming, ribbon jamming, or an
incorrect printer verification printout:
Forms device
Ribbon cartridge
Forms.
Repeat the Setup Instructions on page 1-6 if you suspect a
ribbon, forms, or forms device installation problem.
b. Be sure that enough forms are loaded and press Enter or
Start to get another printout.
c. If the second printout still is not similar to the sample
printout, go to Appendix B, “Problem Solving.”
d. Once you get a good printout, go to Step 10.
10. Turn the power Off (O).
P o w e r S w i t c h
Chapter 1. Setting Up the 4232 Printer Model 302
1-65