4 making internal scsi bus connections, Making internal scsi bus connections – LSI SYM8953U User Manual
Page 26
Advertising
3.75 pc
10.25 pc
11.25 pc
38.25 pc
4.333 pc
48.583 pc
52.5 pc
34.5 pc
44.25 pc
2-10
Installing the SYM8953U Host Adapter
2.2.4 Making Internal SCSI Bus Connections
This section provides step-by-step instructions about making internal
SCSI bus connections.
Step 1.
Plug one end of the 68-pin internal SCSI ribbon cable into
connector J2 (see
Important:
You must match pin 1 on this and all subsequent
connections.
Figure 2.4
Internal SCSI Ribbon Cable to Host Adapter
Connection
Internal
SCSI Interface
J2
Advertising