LSI SYM8953U - Manual (Page 63)

Symbios SYM8953U PCI to Ultra2 SCSI Host Adapter A-1
3.75 pc 10.25 pc 11.25 pc 38.25 pc
4.333 pc
12 pc
12.938 pc
13.851 pc
48.583 pc
52.5 pc
34.5 pc
34.732 pc
Appendix A
Technical
Specifications
This section discusses the physical environment associated with the
SYM8953U Host Adapter. It includes a mechanical drawing of this board,
which is shown in
Figure A.1 . It also includes these topics:
•
Section A.1, “Physical Environment,” page A-1
•
Section A.2, “Operational Environment,” page A-3
A.1 Physical Environment
This section discusses the physical, electrical, thermal, and safety
characteristics of the SYM8953U Host Adapter board. Additionally, this
board is compliant with electromagnetic standards set by the FCC.
A.1.1 Physical Characteristics
The dimensions of the SYM8953U Host Adapter board are 6.00 x 3.50
inches. PCI connection is made through edge connector J1.
Internal SCSI connection is made through the 68-pin HD connector J2.
External SCSI connection is made through the 68-pin HD connector J3.
The J3 connector extends external to the cabinet through a bracket
attached to the board and the face of the connector. The bracket is a
standard ISA type with a cutout to accommodate connector J3.
The J4 connector is for connecting to the computer’s drive activity LED.
It is a 4 pin one row right angle header wired in parallel with the on-board
SCSI Activity LED.
The component height on the top and bottom of the board conforms to
the PCI Specification Revision 2.2.