Lexmark 350 Series - Manual (Page 51)

Solution 2
The camera you connected is not in PictBridge mode. For more information, see the camera documentation.
Removing and reinstalling the software
If the printer is not functioning properly, or if a communications error message appears when you try to use the printer,
you may need to remove and reinstall the printer software.
1 Click Start ΠPrograms or All Programs ΠLexmark 350 Series.
2 Select Uninstall.
3 Follow the instructions on the computer screen to remove the printer software.
4 Restart the computer before reinstalling the printer software.
5 Click Cancel on all New Hardware Found screens.
6 Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
Troubleshooting
51