Lenovo 5023 - Manual (Page 24)

3. Remove the front bezel by releasing the three plastic tabs on the top and
pivoting the front bezel forward. Carefully lay the front bezel to the side
without disconnecting the power switch and light-emitting diode (LED)
assembly cable.
4. To reinstall the front bezel, align the other three plastic tabs on the bottom of
the front bezel with the corresponding holes in the chassis. Then, pivot the
front bezel inward until it snaps into position.
5. Go to “Completing the parts replacement” on page 46.
Figure 7. Removing the front bezel
Figure 8. Reinstalling the front bezel
16 User Guide