Set top of form, Set form length in inches, Set form length in lines – Lexmark 258x User Manual
Page 35: Page/form layout
Page/Form Layout
2-15
Draft document
Set Top of Form
This command sets the first line of printing on each page to the current vertical paper
position.
Set Form Length in Inches
This command sets the form length to a specified number of inches.
USAGE NOTES
•
The value of n must be between 1 and 255.
•
When the command is sent, the current vertical position becomes the new top
of form.
•
Automatic Perforation Skip is canceled
Set Form Length in Lines
This command sets the form length to a specified number of lines.
USAGE NOTES
•
The value of n must be from 1 to 255, and works in conjunction with the
current line spacing (ESC A).
•
When the command is sent, the current vertical position becomes the new top
of form.
•
Automatic Perforation Skip is canceled.
Format
ESC
4
Decimal
27
52
Hexadecimal 1B
34
Format
ESC
C
00
n
Decimal
27
67
00
n
Hexadecimal 1B
43
00
n
Format
ESC
C
n
Decimal
27
67
n
Hexadecimal 1B
43
n