Lennox Hearth PB42 - Manual (Page 13)

PB42 Portable Receipt Printer User’s Guide 13
Understanding the Control Panel
The PB42 control panel contains two buttons and four lights.
Use the buttons to work with the PB42. Use the lights to
understand the state of the printer. See the following tables to
understand how the buttons work and what the lights mean.
Feed
button
Ready-to-Work
indicator
Radio button
and light
Battery
lights
PB42 Control Panel: Use this illustration to familiarize yourself with the
buttons and lights on the PB42.
Understanding How to Use the PB42 Buttons
Button Function
Radio button Press to turn the radio on and off.
Feed button Press once to advance media by 7.5 mm (0.29
inch) or 63 dots.
Press and hold to advance media at 5.08 cm (2
inches) per seconds until you release the button.
Radio and Feed
buttons Press and hold both buttons until the printer
beeps and prints out configuration test page.
For more information, see “Printing a
Configuration Test Page” on page 23.
While the printer is printing, pressing both
buttons causes the printer to cancel all print
jobs. For more information, see “Cancelling a
Print Job” on page 28.