Lennox Hearth PB42 - Manual (Page 25)

PB42 Portable Receipt Printer User’s Guide 25
Configuring the PB42
You can configure several settings on the PB42 by using
Intermec Settings from your CK60 or 700 Computer. Here are
some of the settings you can configure for the PB42 from your
handheld computer:
• Darkness adjust
• Set low battery indicator
• Bluetooth communications
• Restore factory defaults
Intermec Settings is available as part of the operating system
upgrade for your CK60 or 700 Computer. You can download
the upgrade files for your computer from the Intermec web site
at www.intermec.com.
You can also find all of the same settings you can configure in
Intermec Settings in the PB42 Programmer’s Reference Manual.
The reference manual explains each of the commands and lists
the options. You can download the reference manual from the
Intermec web site at www.intermec.com.
Establishing Communications With a Host
The PB42 must establish communications with a host that will
send the data for the printer to print. The PB42 provides two
ways to communicate with a host:
• Bluetooth communications
• Serial communications
Bluetooth communications is the default setting for the PB42.