Linksys WAG300N - Manual (Page 38)

32 Chapter 5: Configuring the Wireless-N ADSL2+ Gateway
The Access Restrictions Tab
Wireless-N ADSL2+ Gateway
4. Click the Edit List of PCs button to select which PCs will be affected by the policy. The List of PCs screen will
appear. You can select a PC by MAC Address or IP Address. You can also enter a range of IP Addresses if you
want this policy to affect a group of PCs. After making your changes, click the Save Settings button to apply
your changes or Cancel Changes to cancel your changes. Then click the Close button to exit this screen.
5. Click the appropriate option, Deny or Allow, depending on whether you want to block or allow Internet access
for the PCs you listed on the List of PCs screen.
6. Decide which days and what times you want this policy to be enforced. Select the individual days during
which the policy will be in effect, or select Everyday. Then enter a range of hours and minutes during which
the policy will be in effect, or select 24 Hours.
7. If you want to block websites with specific URL addresses, enter each URL in a separate field next to Website
Blocking by URL Address.
8. If you want to block websites using specific keywords, enter each keyword in a separate field next to Website
Blocking by Keyword.
9. You can filter access to various services accessed over the Internet, such as FTP or telnet, by selecting
services from the drop-down menus next to Blocked Services. The port numbers and protocol for the selected
service will be automatically displayed.
If the service you want is not listed, select User-Defined. Enter its port numbers in the fields provided. Then
select its protocol, ICMP, TCP, UDP, or TCP & UDP from the drop-down menu.
10. Click the Save Settings button to save the policy’s settings. To undo the policy’s settings, click the Cancel
Changes button. Click Help for more information.
Figure 5-27: List of PCs