Linksys WAG300N - Manual (Page 47)

41 Chapter 5: Configuring the Wireless-N ADSL2+ Gateway
The Administration Tab
Wireless-N ADSL2+ Gateway
• Set Community. Enter the password that allows read/write access to the Gateway’s SNMP information.
• Trap Management: Trap to. Enter the IP address of the remote host computer that will receive the trap
messages.
UPnP
UPnP allows Windows Me and XP to automatically configure the Gateway for various Internet applications, such
as gaming and videoconferencing.
• UPnP. To enable UPnP, click Enable. Otherwise, click Disable.
WLAN
• Management via WLAN. This feature allows the Gateway to be managed by a wireless computer on the local
network when it logs into the Gateway’s Web-based Utility. To enable this feature, click Enable. Otherwise,
click Disable.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes. Click Help for more information.