Figure 5-28: single port forwarding, The applications and gaming tab – Linksys WAG300N User Manual
Page 39
33
Chapter 5: Configuring the Wireless-N ADSL2+ Gateway
The Applications and Gaming Tab
Wireless-N ADSL2+ Gateway
The Applications and Gaming Tab
The Single Port Range Forwarding Tab
Use the Single Port Range Forwarding screen when you want to open a specific port so users on the Internet can
see the servers behind the Gateway (such servers may include FTP or e-mail servers). When users send this type
of request to your network via the Internet, the Gateway will forward those requests to the appropriate computer.
Any computer whose port is being forwarded should have its DHCP client function disabled and should have a
new static IP address assigned to it because its IP address may change when using the DHCP function.
Single Port Forwarding
•
Application. Enter the name of the application in the field provided.
•
External Port and Internal Port. Enter the External and Internal Port numbers.
•
Protocol. Select the protocol you wish to use for each application: TCP or UDP.
•
IP Address. Enter the IP Address of the appropriate computer.
•
Enabled. Click Enabled to enable forwarding for the chosen application.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes. Click Help for more information.
Figure 5-28: Single Port Forwarding