LSI SATA 150 User Manual
Page 28
Advertising
2-4
Hardware Installation
Copyright © 2002–2006 by LSI Logic Corporation. All rights reserved.
Figure 2.1
Inserting the SATA 150 Storage Adapter in a PCI Slot
Step 5.
Attach the bracket to the computer frame with the bracket
screw.
Step 6.
Configure the Serial ATA devices and install them in the host
system computer case.
See the Serial ATA device documentation to determine any pre-
installation configuration requirements.
Step 7.
Connect the Serial ATA cables between the SATA 150 storage
adapter and the Serial ATA devices.
Chapter 3, “SATA 150 Storage Adapter Characteristics”
shows
the connector locations on the MegaRAID SATA 150 storage
adapter.
Bracket Screw
32-bit PCI slots
5 V, 64-bit PCI slot
3.3 V, 64-bit PCI slots
Advertising