Panasonic WJ-HD200 - Manual (Page 30)

2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
● Disk Check HDD CHECK
S.M.A.R.T. (Self-Monitoring Analysis and Reporting
Technology) is activated or deactivated for HDD check.
1. Select either ON or OFF with the JogDial.
The default is OFF.
ON 0:00-23:00: The recorder checks the HDD at the
specified time every day.
OFF: Check is deactivated.
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
Note: Recording will resume after one-second intermis-
sion when HDD is checked.
● Camera Title CAMERA TITLE
Camera title and display position are specified for each
camera.
1. In the DISPLAY SETUP menu, move the cursor to CAM-
ERA TITLE O, and press the JogDial to open the CAM-
ERA TITLE menu.
2. Move the cursor to the camera you wish to program
using the [D] or [C] button.
30
● Disk Capacity Warning HDD FULL
The recorder observes the disk capacity to warn the opera-
tor that the available capacity is nearing the end when
STOP is selected for DISK END MODE. There are two warn-
ing levels. First, the FULL indicator on the front panel blinks
when the remaining capacity has reached the preset value.
Finally, the buzzer beeps when the disk is full, provided that
the DISK END BUZZER parameter in the SYSTEM SETUP is
set to ON. At the same time, the FULL indicator turns on.
1. Select the desired value with the JogDial.
The default is 1 %.
1% – 99%: The FULL indicator blinks when the remain-
ing capacity reaches the selected value.
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
● Remote LED REMOTE LED
The remote LED on the front panel will indicate or ignore
the remote controlling status to the recorder via the net-
work.
1. Select either ON or OFF with the JogDial.
The default is OFF.
ON: REMOTE LED turns on when the network controls
the recorder.
OFF: REMOTE LED is deactivated.
DISPLAY SETUP
CLOCK
→
JUN30.03 15:05
TIME&DATE TYPE1 24H
TIME&DATE DISP.ON
TIME&DATE POSI.R-LOWER
STATUS DISP. ON
STATUS POSI. R-LOWER
HDD FULL 1%
REMOTE LED ON
HDD CHECK 0:00
CAMERA TITLE
O
DISPLAY SETUP
CLOCK
→
JUN30.03 15:05
TIME&DATE TYPE1 24H
TIME&DATE DISP.ON
TIME&DATE POSI.R-LOWER
STATUS DISP. ON
STATUS POSI. R-LOWER
HDD FULL 1%
REMOTE LED ON
HDD CHECK 0:00
CAMERA TITLE
O
CAMERA TITLE
CAM TITLE POSI.
1 OFF
2 ON → 2¥¥¥¥ R-LOWER
3 ON → 3¥¥¥¥ L-LOWER
4 OFF
5 OFF
6 OFF
7 OFF
8 OFF
DISPLAY SETUP
CLOCK
→
JUN30.03 15:05
TIME&DATE TYPE1 24H
TIME&DATE DISP.ON
TIME&DATE POSI.R-LOWER
STATUS DISP. ON
STATUS POSI. R-LOWER
HDD FULL 1%
REMOTE LED ON
HDD CHECK 0:00
CAMERA TITLE
O