Panasonic WJ-HD200 - Manual (Page 31)

31
3. Select either ON or OFF with the JogDial.
The default is ON for all cameras.
ON: Enables camera title display, title registration, and
position selection.
OFF: Disables the camera title functions.
4. Press the JogDial (SET) to validate the selection.
When on is selected, go to the following steps. The cur-
sor moves to the title edit area.
When off is selected, return to step 2 above, or press
the [SETUP/ESC] button to escape from the CAMERA
TITLE menu.
5. <Editing>
5-1 Select a character for the digit with the JogDial.
Each title is identical to the camera number: 1, 2, 3,
and so forth as the default.
Available characters are as follows.
0 ~ 9 A ~ Z ! % &
( ) * – / : . ?
← → ↑ ↓
•
5-2 Press the JogDial to validate the selection for the
digit.
The selected character is displayed on the digit,
and the cursor goes to the right digit.
5-3 Press the [SETUP/ESC] button to move the cursor
back to the previous digit.
5-4 Repeat steps 5-1, 5-2 and 5-3 until all digits are
entered.
5-5 Press the JogDial when the cursor is on the right
end digit to validate the entered title. The cursor
moves to POSI. column.
Note: A bullet (centered dot) stands for a space, used
for deleting entered characters.
6. Select a display position with the JogDial.
The default setting for camera 1, 2, 5, and 6 is R-
LOWER, for camera 3, 4, 7, and 8 is R-UPPER.
R-LOWER: Displays the camera title in the right lower
corner.
R-UPPER: Displays the camera title in the right upper
corner.
L-LOWER: Displays the camera title in the left lower
corner.
L- UPPER: Displays the camera title in the left upper
corner.
Note: When 9-split screen is displayed, the camera title
position is fixed to R-LOWER.
7. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
■ System Setup SYSTEM SETUP
There are two pages of the system setup. To turn a new
page, continue to move the cursor with the [D] or [C] but-
ton.
● Password Lock Setup PASSWORD
LOCK
A five-digit password is entered to protect all settings,
recorded pictures, and operating status against erroneous
operation and tampering. Settings alone can be also pro-
tected from unauthorized access. While the LOCK indicator
on the front panel is on, a message “NOW KEY LOCKED!”
is displayed to warn unauthorized operators. If accessed in
this condition, the buzzer beeps.
1. Move the cursor to PASSWORD LOCK with the [D] or
[C] button.
OPERATE
ALARM
SUSPEND
RESET OSD
TIMER DST
REMOTE
LOCK SE
SYSTEM SETUP (1 OF 2)
PASSWORD LOCK OFF
ALL
→
*****
OPERATION
→
*****
KEYLOCK BUZZ ON
SKIP ALM-RECALL 5PAGE
SIMUL REC&PLAY ON
ALTER DETECT OFF
DISK END MODE CONTINUE
DISK END BUZZ ON
SYSTEM SETUP (1 OF 2)
PASSWORD LOCK OFF
ALL
→
*****
OPERATION
→
*****
KEYLOCK BUZZ ON
SKIP ALM-RECALL 5PAGE
SIMUL REC&PLAY ON
ALTER DETECT OFF
DISK END MODE CONTINUE
DISK END BUZZ ON
SYSTEM SETUP (2 OF 2)
PLAY PRIORITY LOCAL
TIME ADJUST SETUP O
AUTO ERASING OFF