Polycom TransTalk 9000-Series - Manual (Page 127)

Auto Dialing
5-17
Auto Dialing
Description
Auto Dial buttons can be programmed only on system phones.
This Telephone Programming procedure lets system phone users dial outside
numbers, extension numbers, feature codes, or account codes with a single
touch, by pressing a programmed button. If an extension number is stored on an
Auto Dial button, the user can dial, signal, or transfer calls to the extension by
pressing the button. An Auto Dial number can be stored on any programmable
button (a button with no line or pool assigned) on a system phone.
Related Features
■
You can use the Auto Dial button instead of dialing the two-digit extension
number required for these features: Call Coverage, Call Forwarding/Call
Follow-Me, Call Park, Message Light On, Message Light Off, Station
Unlock, and Voice Mailbox Transfer.
■ To set up a Fax Management button, program the fax extension number on
an Auto Dial button with lights. Special light patterns on the Auto Dial button
for the fax extension indicate fax machine status. Chapter 4 provides more
information about using a Fax Management button. Identify fax extensions
using Fax Machine Extensions (#601).
■
You can include special functions, such as a Pause, in the Auto Dial
number. See Special Dialing Functions for more information.
■
An Auto Dial number can begin with a star code; the system automatically
inserts a delay based on the Star Code Dial Delay (#410) setting.
■ This feature cannot be used with Call Screening (F25).
Considerations
■
If you program an extension number on a button with lights, the lights show
calling activity at the extension (see ‘‘Lights’’ on page 3-4).
■
You can connect an Intercom Autodialer to the system phones at extension
10 and 11 to have Auto Dial buttons for all of the extensions in your system.
■ Each user can have only one Auto Dial button—either on the system phone
or on the Autodialer—for another extension in the system. That button can
be programmed for intercom ringing, intercom voice signaling,
or manual
signaling.
■
When programming emergency numbers for Auto Dialing and/or making
test calls to those numbers, you should: 1) Remain on the line and briefly
explain to the dispatcher the reason for the call before hanging up and 2)
Perform such activities in the off-peak hours, such as early morning or late
evening.