Panasonic IMAGECHECKER A210 - Manual (Page 2)

Type switching not required!
First field of vision
(Block 1)
Second field of vision
(Block 2)
Third field of vision
(Block 3)
3
Type 1
User-Defined Mode
New New
Multiple inspections of up to three blocks with no
switching time!
Conventional method
User-Defined Mode
●Handled by type switching using an external device.
●Type switching requires time and usage restrictions
apply.
●Internally switches to the process block via an
external signal.
●External device is not used, so inspection time is
greatly reduced!
*Can be executed from the keypad as well.
When you wish to perform multiple continuous inspections because the
work will not fit in the field of view of a single image capture.
Example
Type 2 Type 64
Execute All Mode
Three times the number of checkers can now be registered per type, so you can
inspect many points at one time!
Multiple simultaneous point inspection possible for applications
such as inspecting LED lighting.
Plenty of external outputs for judgment results (96 points for the
A210 and 48 points for the A110) allow simultaneous output of
judgment results for multiple inspection points.
Example
Branch inspection without complicated
settings provides great convenience!
Conventional method
Automatic Switch Mode
●Execute all checkers and output results
●Perform direction judgment externally and compare results
●Perform direction judgment and execute the
required checker
Execute block 1
(5 msec)
Detect the direction
judgment marker
Normal direction Reverse direction
Execute Block 2
(30msec)
Execute Block 3
(30msec)
MICRO-IMAGECHECKER A210 and A110
Multichecker V2 (Photo shows A210)
It is possible to first make a direction judgment, and then perform a
separate inspection (character appearance or mark width measurement)
based on this direction.
Execution time: 65msec.
Execution time: 35msec!
Direction judgment
2
Example
Execution time Execution time
reduced by half! reduced by half!
Our highly acclaimed, compact A210 and A110 MultiChecker image processing units are now even more powerful! The V2
(Ver. 2) upgrade includes new functions for even greater convenience. To meet your diverse range of inspection
requirements, we have increased the number of checkers by a factor of three. In addition to making more inspection locations
possible, they now come equipped with a new mode that allows two-level branch inspection using one image checker, and an
extensive range of functions that allow use in a wide range of applications.
You can now register three times more checkers per type!
●A210 MultiChecker: increased from 32 to 96
●A110 MultiChecker: increased from 16 to 48
Possible to choose from three execution modes to suit your
inspection requirements!
Automatic Switch Mode
The MultiChecker V2 Series - more powerful
than ever!
Three times the processing capacity
of their predecessors!
Designed to meet a diverse variety of
inspection needs!
Execution time
reduced by half!
11/2004 11/2004