Example point-to-point configuration – Paradyne ACCULINK 316x User Manual
Page 25

ACCULINK 316x DSU/CSU
2-2
December 1996
3160-A2-GB22-10
In addition, a 3160 DSU/CSU, acting as an SNMP
agent, can be connected to and managed from an SNMP
management system in one of two ways:
•
Serial connection via the COM or MODEM port to
an SNMP management system using either
Point-to-Point Protocol (PPP) or Serial Line
Internet Protocol (SLIP) (Figure 2-5).
•
Serial connection via the COM or MODEM port
(using PPP or SLIP) through a network device (e.g.,
router) that supports IP routing to the network
management system (Figure 2-6).
NETWORK
496-14296-03
ACCULINK
3160/3164 DSU/CSU
LAN
ROUTER
LAN
ROUTER
ACCULINK
3160/3164 DSU/CSU
T1
T1
Figure 2-1. Example Point-to-Point Configuration
NETWORK
SERVICES
PBX
LAN
ROUTER
496-14312-03
DSU/CSU
Figure 2-2. Example Shared Access to Network-Based Services Configuration