Paradyne ACCULINK 316x - Manual (Page 42)

Installation
2-19 3160-A2-GB22-10 December 1996
NOTE
This page of the manual is self-
supporting and can be removed to
prevent unwanted knowledge of the
security access levels and their
selection.
Changing User Interface Access Security
To change user interface access security,
1. Press the key two times from the top-level
screen.
F1
DSU ESF
Stat
Test Cnfig
F2 F3
2. Press the key three times.
F1
DSU ESF
Stat
Test Cnfig
F2 F3
3. Press the key once.
F1
DSU ESF
Stat
Test Cnfig
F2 F3
The Security screen appears.
F1
Security:
Lvl1
Lvl2
F2 F3
4. Press F1 to select Lvl1, or press F2 to select Lvl2.
After you make a selection, the top-level screen
appears.
If you do not make a selection within 5 minutes,
the Automatic Device Health/Status screen
appears.