Panasonic SCPTX7 - Manual (Page 18)

RQ
T
8
9
2
6
18
Use the following connections when you want to output audio of your cable TV or VCR through this unit’s speakers.
≥Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not be displayed properly.
Turn the television off before connecting, and refer to the television’s operating instructions.
§This unit can decode the surround signal from the Set Top Box (Satelite receiver, Cable box, etc).
1 Press [SETUP].
2 Press [
3 4] to select “Other Setup” and press [ENTER].
3 Press [ 3 4] to select “TV Audio Input” and press [1].
4 Press [ENTER].
5 Press [
3 4] to select “DIGITAL IN” and press [ENTER].
6 Press [RETURN] to exit the screen.
7 Then press [
N SELECT O] to switch the selector to “TV Audio” as the source.
Set the optical input settings ( ➜ page 83, Selecting to the sound effects).
[Note]
≥Before purchasing an optical digital audio cable, check the terminal shape of the equipment to be connected.
To enjoy multi-channel surround sound DVD-Video, connect an amplifier with a built-in Dolby Digital or DTS decoder using an
optical digital audio cable.
Necessary Settings:
Set “PCM Digital Output”,“Dolby Digital” and “DTS Digital Surround” (
➜ page 92, “Audio” menu)
[Note]
≥Using the connections shown above, you can output CD or DVD audio only. You cannot output audio from the HDD, Tuner or
externally connected devices.
≥Before purchasing an optical digital audio cable, check the terminal shape of the equipment to be connected.
≥You cannot use DTS Digital Surround decoders not suited to DVD.
≥Even if using this connection method, output will be in only 2 channels when playing DVD-Audio.
Connecting to the Set Top Box (Satellite receiver, Cable box, etc) or video cassette recorder
Optional connections and settings
OPTICAL OUT
XM
DIGITAL
OPTICAL
OUT IN(TV) AV OUT
AM
ANT
FM
ANT
75
LAN
LOOP ANT GND COMPONENT
VIDEO OUT
VIDEO OUT
R
Y
L
R
L
P
R
P B
(10BASE-T/
100BASE-TX)
AUX TV IN
EXT
LOOP
RF IN
RF OUT
AUDIO
OUT
L
R
VIDEO IN AUDIO
IN
RF IN
DC OUT 5V
500mA MAX
OPTION
V.1
Television (not included)
Video cable (included)
Main unit
Audio cable
(not included)
RF cable
(not included)
Set Top Box (Satellite
receiver, Cable box, etc)
or
video cassette recorder
(not included)
To your cable TV service or television antenna
RF cable
(not included)
Optical digital audio cable §
(not included)
Insert fully, with this side
facing up.
Connecting to the 5.1 channel amplifier
XM
DIGITAL
OPTICAL
OUT IN(TV) AV OUT
AM
ANT
FM
ANT
75
LAN
LOOP ANT GND COMPONENT
VIDEO OUT
VIDEO
OUT
R
Y
L
R
L
P
R
P
B
(10BASE-T/
100BASE-TX)
AUX TV IN
EXT
LOOP
OPTICAL IN
DC OUT 5V
500mA MAX
OPTION
V.1
Amplifier (not included) Optical digital audio cable
(not included)
Main unit
Insert fully with this side
facing up.
PTX79P.book Page 18 Monday, April 9, 2007 9:24 AM