Messages – Panasonic SCPTX7 User Manual
Page 98
RQ
T
8
9
2
6
98
Messages
Television displays (in general)
Page
Television displays (when connected to a network)
There are no tracks in the
Music Collection.
≥There are no tracks recorded to the HDD.
—
There are no tracks that can
be converted or analyzed.
≥All tracks (or playlists) in the HDD have completed conversion and analysis.
—
There is not enough space
on the Hard Disk Drive.
Available space: xx GB
Please erase unnecessary
tracks, and try again.
≥Due to insufficient space on the HDD, a portion or all of the tracks cannot be
recorded and/or edited.
– Delete unnecessary tracks.
– Available space may be increased by performing conversion/analysis.
71
42,
43
This disc may not be played
in your region
≥You can only play DVD-Video if their region number is “1”, “ALL” or multiple region
numbers including “1”.
Cover
Canceled.
Cannot record this track.
≥You tried to record tracks from recordable discs that use data formats other than
CD-DA, WMA or MP3, or you tried to record SCMS-protected tracks. Some or all
tracks cannot be recorded.
35
You cannot do that during
play.
≥Perform the operation again after stopping the unit.
—
You cannot do that during
play. Stop to continue?
≥This operation cannot be performed during play. Select “Yes” to stop play and then
proceed with the desired operation.
—
You cannot use this name.
Please use another one.
≥You are trying to add a name or character(s) that are used by this unit for file
management purposes to the beginning of the name of this playlist. Give another
name.
—
/
≥The operation is prohibited by the unit or disc.
—
Canceled by timeout.
≥Make sure that the router, modem, etc. are all turned on. Also check the connection
between the router and this unit, and check the network settings.
20,
95
Cannot connect to network.
≥Check the LAN cable connection. Also make sure that both the router and modem
are turned on.
20
Cannot obtain IP address.
≥Check that this unit is connected to the router, and check the settings.
20,
21
The PC name that was input
not found. Canceled.
≥The cable may not be connected. Check the cable connection between the PC and
this unit.
≥Check that the PC connected to this unit is turned on.
≥The PC name may have been input incorrectly. Input the PC name correctly.
—
—
40
Unknown error has occurred.
≥Turn this unit and the connected device(s) off and on again, and then repeat the
operation again.
—
PTX79P.book Page 98 Monday, April 9, 2007 9:24 AM