Panasonic SCPTX7 - Manual (Page 95)

RQ
T
8
9
2
6
95
Changing the network settings
These settings are used if you will connect this unit to a
network.
Preparation
1 To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit.
2 Press [ Í].
1
Press [SETUP].
2
Press [ 3 4] to select “Other Setup” and press [ENTER].
3
Press [ 3 4] to select “Network” and press [1].
4
Press [ 3 4] to select “Network Settings” and press
[ENTER].
The network connection status is displayed.
In most cases, default settings can normally be used without
making any changes.
When connecting this unit to a network and assigning a fixed
IP address, perform the following settings.
After performing steps 1–4 ( ➜ above)
5
Press [ 3 4] to select “TCP/IP 1” and press [ENTER].
6
Press [ 3 4] to select “IP Manual Setting” and press
[ENTER].
7
Press [ 3 4] to select the item to be set and press
[ENTER].
8
Enter numbers with the numbered buttons and press
[ENTER].
≥After checking the specifications for your broadband
router, enter each number.
≥The numeric input range is between 0 and 255.
Repeat steps 7–8, and enter numbers for other items.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
If you made an input mistake
Move the cursor with [
2 1] and make corrections with the
numbered buttons.
To delete settings and use default settings
Select “IP Auto Setting” in step 6 and press [ENTER].
In most cases, default settings can normally be used without
making any changes.
When setting an assigned DNS server from your ISP, perform
the following settings.
After performing steps 1–4 ( ➜ left)
5
Press [ 3 4] to select “TCP/IP 2” and press [ENTER].
6
Press [ 3 4] to select “DNS Manual Setting” and
press [ENTER].
≥If “TCP/IP 1” is set to “IP Manual Setting”, the “DNS Auto
Setting” will not be displayed.
7
Press [ 3 4] to select the item to be set and press
[ENTER].
8
Enter numbers with the numbered buttons and press
[ENTER].
≥Follow the instructions given by your ISP and enter the
numbers.
≥The numeric input range is between 0 and 255.
Repeat steps 7–8, and enter numbers for other items.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
If you made an input mistake
Move the cursor with [
2 1] and make corrections with the
numbered buttons.
To delete settings and use default settings
Select “DNS Auto Setting” in step 6 and press [ENTER].
After performing steps 1–4 ( ➜ left)
5
Press [ 3 4] to select “IP Address” and press [ENTER].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
Common procedures
Manually setting the IP address
HDD BAND
FUNCTIONS MENU PLAYLIST
CANCEL
SELECT
VOLUME
FAVORITE
PLAYMODE
HDDREC
ENERGETIC RELAXING MELLOW
MUTING SELECT SOUND
SLEEP FL DISPLAY VS
2ND
EMOTIONAL
REG SELECT
PLAY PAUSE STOP
CH SELECT
SETUP SETUP
ONE TOUCH PLAY
S
TA
R
T ޓ
ޓ
ޓ
TO
P M
E N U
TCP/IP 1
TCP/IP 2
IP Address
Auto Setting
Auto Setting
Network Settings
Connected to network.
IP Address
Subnet Mask
0. 0. 0. 0
0. 0. 0. 0
Gateway 0. 0. 0. 0
IP Manual Setting
Manually setting the DNS server
To check the IP Address, etc.
Primary DNS Address
Secondary DNS Address
0. 0. 0. 0
0. 0. 0. 0
DNS Manual Setting
[MAC Address]
[IP Address]
[Subnet Mask]
[Gateway]
[Primary DNS Address]
[Secondary DNS Address]
00-00-00-00-00-00
---.---.---.---
---.---.---.---
---.---.---.---
---.---.---.---
---.---.---.---
IP Address
C
h
ang
ing th
e un
it’
s
se
tting
s
Re
fe
re
nc
e
PTX79P.book Page 95 Monday, April 9, 2007 9:24 AM