Panasonic AW-E800 - Manual (Page 37)

-35-
IRIS
MAN
AUTO
1000 S/S
ELC
500 120
OFF
SHUTTER SCENE
2 1
3
USER
SET
OFF
ON +18
+9
0(dB) +6
OFF
− 6(dB)
GAIN
BAR
CAM
HIGH
LOW
OFF
RCB
DTL AGC
R B
R B PED
TOTAL
PED
A
B
ATW
AWC
AUTO
HOLD
ABC
AUTO/ATW
PAINTING
GAIN
RCU (RCB)
DTL Switch
!8 Detail Level Setting [Level: OFF/LOW/HIGH]
Detail level can be adjusted when Detail Select set-
ting
!7 is at Normal. Super DTL level can be adjust-
ed when it is at Super DTL.
In case of using the RCU (RCB), the above can be
adjusted with the contour correction switch (DTL).
!4 Sub Carrier Phase Coarse Adjustment
[SC Coarse: 1/2/3/4]
Coarse adjustment of subcarrier phase can be
made when a genlock signal is supplied.
!5 Subcarrier Phase Fine Adjustment [SC Fine:
–511 - +511]
Fine adjustment of subcarrier phase can be made
when a genlock signal is supplied.
!6 Color Bar Setup Setting [Color Bar Set:
0.0 IRE/7.5 IRE]
The setup level of color bar can be adjusted.
!7 Detail Select Setting [DTL Select: Normal/Super
DTL]
If contour correction is not sufficient at the Normal
position when Detail Level setting
!8 is set to LOW
or HIGH, select the Super DTL position.
!9 Noise Suppress Level Setting [Noise Suppress:
OFF/LOW/HIGH]
Screen noise can be reduced when Detail Level
setting
!8 is at HIGH or LOW.
Neither Normal nor Super DTL is valid for contour
correction if Detail Level setting
!8 is in the OFF
position.
Note