Panasonic AW-E800 - Manual (Page 38)

-36-
@0 Flesh Noise Suppress Level Setting [Flesh Noise
Suppress: OFF/LOW/HIGH]
Flesh noise is suppressed in two steps when the
DTL Level is at HIGH or LOW.
@1 Electronic Shutter Setting [Shutter Speed:
OFF/1/100 to 1/10 000/S/Scan/Auto ND]
OFF:
Electronic shutter is turned off.
1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000:
Electronic shutter operates at one of these
speeds as selected.
S/Scan (Synchro Scan): Electronic shutter oper-
ates at the speed set with the electronic shutter
synchro-scan setting
@2.
Auto ND: Electronic shutter is controlled to auto-
matically adjust the luminance. (ELC)
@2
Electronic Shutter Synchro Scan Setting
[Synchro Scan: 60.58Hz - 15.75kHz]
This setting is possible only when Electronic Shutter
setting
@1 is at S/Scan.
Horizontal bar noise can be reduced by synchro-
scan adjustment in shooting workstation scenes, for
example.
• In case of using the RCU (RCB), none of the
shutter speeds
−
1/250, 1/2 000, 1/4 000, and
1/10 000 can be selected.
• In case of using the hybrid control panel, only
OFF, 1/100, or Auto ND (ELC) can be selected.
• If the lens iris switch is at M (Manual) when oper-
ating the camera alone or when the iris switch
on the RCU (RCB) is at AUTO, Auto ND may not
function. Set the lens iris switch to A (Auto).
• Flickering may increase at Auto ND under fluo-
rescent lights.
• Auto ND is automatically selected if Auto ND
(ELC) setting r is set to ON.
Note