4 power connection, Universal ac power (100–240 vac), 120 vac power (us) – Patton electronic 1088/K User Manual
Page 17: 230 vac power (international), Dc power, Power connection

17
4.4 POWER CONNECTION
Universal AC Power (100–240 VAC)
The Model 1088 uses a 5 VDC, 2 A universal input 100–240 VAC, power
supply (center pin is +5V). The universal input power supply has a male
IEC-320 power entry connector. This power supply connects to the
Model 1088 by means of a barrel jack on the rear panel. Many interna-
tional power cords are available for the universal power supply (refer to
Appendix B for country-specific power cords.
The Model 1088 powers up as soon as it is plugged into an AC outlet—
there is no power switch.
120 VAC Power (US)
The 100–132 VAC adapter supplied with the U.S. version of the Model
1088 is a wall mount type and may be plugged into any approved
120 VAC wall jack.
230 VAC Power (International)
The 230 VAC adapter supplied with the International version of the Model
1088 is a wall mount type and may be plugged into any approved 230
VAC wall jack.
DC Power
The 36-60 VDC DC to DC adapter is supplied with the DC version of the
Model 1088. The black and red leads plug into a DC source (nominal
48VDC) and the barrel power connector plugs into the barrel power sup-
ply jack on the rear panel of the 1088. (See Figure 9).
Figure 9.
Connecting DC Power to the 48V-PSM3 DC Power Supply
WARNING
There are no user-serviceable parts in the power supply
section of the Model 1088. Fuse replacement should
only be performed by qualified service personnel. Con-
tact Patton Electronics Technical support at (301)975-
1007, via our web site at http://www.patton.com, or by
e-mail at [email protected], for more information.
To Power
Supply Jack
To -48VDC
Source
-Vin
+Vin
SWITCHING POWER SUPPL
Y
MODEL
: SYD1
106-0505
INPUT
: 36-60V 0.2A
MAX
OUTPUT
: +5V 1.0A
OUTPUT
POWER : 5W MAX
S/N
: G01234567890
MADE IN CHINA
BY
SUNNY
Black lead (-V)
Red lead (+V)
Barrel power connector