Philips Flaors 848390207 - Manual (Page 11)

English
EN 11
Conne
c
t
3 Connect
This section describes the basic connections
required for this DVD Home Theatre unit
before it can be used.
Basic connections:
Place the unit
Connect video cables
Connect speakers to subwoofer
Connect subwoofer and radio antenna
Optional connections:
Connect audio cables/other devices
Connect audio from TV
Connect audio from cable box/
recorder/game console
Connect portable media player
Connect USB device
Mount Flavors frames
Attach table stand to the main unit
Mount the DVD Home Theatre unit/
speakers
Note
Refer to the type plate at the rear or bottom of the
product for identifi cation and supply ratings.
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet. •
•
•
•
•
•
•
•
•
•
•
•
•
•
Place the unit
For optimum performance, place this unit
on top of a table or mount it on the wall.
Never place this unit in an enclosed cabinet.
Install this unit near the AC outlet where
the AC power plug can be easily reached.
RIGHT
LEFT
1
Place this DVD Home Theatre unit near to
the TV.
Attach the table stand to the DVD
Home Theatre unit before place it on a
table top.
2
Place the speakers at the normal listening
ear-level and directly parallel to the
listening area.
3
Place the subwoofer at the corner of the
room or at least one metre away from the
TV.
Note
To avoid magnetic interference or unwanted noise,
never place the speakers too close to the TV or any
radiation devices. •
•
•
•
•
1_fts6000_12_eng3_final.indd 11 1_fts6000_12_eng3_final.indd 11 2008-09-03 11:55:01 AM 2008-09-03 11:55:01 AM