Turn on progressive scan – Philips Flaors 848390207 User Manual

Page 21

Advertising
background image

English

EN 21

Get

st

ar

ted

Turn on Progressive Scan

If you connect this unit to TV with the
component video connection (see chapter
‘Connect video cables - Option 3: Connect to
component video socket’ for details), you can
set the progressive scan output if your TV
supports progressive scan.

1

Turn on the TV to the correct viewing
channel for this unit.

2

Press DISC.

3

Press OPTIONS.

4

Press V to select [ Video Setup ] in the
menu, then press B.

Picture Setting

HDMI Setup

TV Display

TV Type

Progressive

On

Off

Video Setup

Closed Caption

5

Select [ Progressive ] > [ On ], then press
OK.

A warning message is displayed.

6

To proceed, select [ OK ] in the menu and
press OK.

The progressive setup is complete.

Note

If a blank/distorted screen is displayed, wait for 15
seconds for the auto recover.
If no picture displayed, turn off the progressive scan
mode as follows:
1) Press Z to open the disc compartment.
2) Press b.
3) Press AUDIO/SYNC.

7

To exit the menu, press OPTIONS.

8

You can now turn on the progressive scan
mode on your TV (see the TV user
manual).

Note

There are some progressive scan TVs that are
not fully compatible with this unit, resulting in an
unnatural picture when playing back a DVD VIDEO
disc in the progressive scan mode. In such case, turn
off the progressive scan feature on both this unit and
your TV.

1_fts6000_12_eng3_final.indd 21

1_fts6000_12_eng3_final.indd 21

2008-09-03 11:55:05 AM

2008-09-03 11:55:05 AM

Advertising
This manual is related to the following products: