Philips Flaors 848390207 - Manual (Page 23)

English
EN 23
Get
st
ar
ted
7
Select [ OK ] in the menu, then press OK
to start scanning of devices.
Once complete, audio input mapping
menu is displayed.
Optical In
AUX
HDMI Input Mapping
TV
Other (Non-HDMI)
For example, if your TV audio is
connected to the AUX IN sockets on
this unit, select [ AUX ] and map onto
the correct device (brand name) shown
at the right panel.
8
Select the audio input of this unit that is
used to connect to other HDMI device
(e.g. AUX, Optical In), then press B.
9
Select the correct device that connected
to this audio input, then press OK.
Repeat steps 8~9 to map other
connected devices.
10
To exit the menu, press OPTIONS.
•
•
Select a play source
On the main unit
1
Press SOURCE button repeatedly to
select: DISC > FM > AUX > DI >
MP3 LINK >
DISC ...
On the remote control
Press AUX / MP3 LINK repeatedly to listen
to the audio output from the external
device.
Press USB/RADIO repeatedly to switch to
USB or FM mode.
Press DISC to switch to DISC mode.
Display Device connected to
AUX AUX IN sockets.
DI DIGITAL IN-OPTICAL
socket.
MP3 LINK MP3 LINK socket.
•
•
•
1_fts6000_12_eng3_final.indd 23 1_fts6000_12_eng3_final.indd 23 2008-09-03 11:55:05 AM 2008-09-03 11:55:05 AM