Philips Flaors 848390207 - Manual (Page 13)

English
EN 13
Conne
c
t
Option 3: Connect to component
video socket
COMPONENT VIDEO OUT
1
Connect the component video cables (not
supplied) from the Y P
B
P
R
sockets on this
unit to the component video input sockets
on your TV.
If a progressive scan TV is used, you
may turn on the progressive scan mode
(see chapter ‘Turn on Progressive Scan’
for details).
Tips
The component video input socket on your TV may
be labelled as Y Pb/Cb Pr/Cr or YUV.
This type of connections provide good picture
quality. •
•
•
Option 4: Connect to Video socket
VIDEO IN
VIDEO OUT
1
Connect a composite video cable (not
supplied) from the VIDEO OUT socket on
this unit to the video input socket on your
TV.
Tips
The video input socket on your TV may be labelled
as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
This type of connections provide standard picture
quality. •
•
1_fts6000_12_eng3_final.indd 13 1_fts6000_12_eng3_final.indd 13 2008-09-03 11:55:01 AM 2008-09-03 11:55:01 AM