Panasonic CQDF802 - Manual (Page 2)

❐
You can operate this unit by pressing buttons on the main unit and the remote control unit, and touch pan-
els on the main unit.
≥ Some operations can be activated by pressing buttons only on main unit or remote control unit.
Those cases are described in the instructions.
Example: Press [OPEN] on the main unit.
≥ These instructions describe buttons that are concerned with operations as follows.
Example: Press [VOL "] or [VOL #]/["] or [#].
E
N
G
L
I
S
H
4
CQ-DF802W
19
(Display)
E
N
G
L
I
S
H
3
CQ-DF802W
18
Name of Controls Functions
(Main Unit and Touch Panel)
Example: Press /[ "] or [#].
Example: Press /[MENU]/[DISP]. EXIT
[buttons on the main unit]/[remote control unit]
/[remote control unit]
( ➡ above.)
cursor on the touch panel
or
/[buttons on main unit]/[remote control unit]
( ➡ above.)
Spectrum Analyzer display on the touch panel
[ "] [#] VOL (Volume)
≥ Adjusts the sound volume.
(
➡ page 21)
[MENU]
≥
Enters the menu setting
mode.
≥ Returns to the regular
mode during menu setting.
[BAND] (APM/;/1)
(Auto Preset Memory/Pause)
≥
Selects a band. ( ➡ page 22)
≥ Pause CD playing.
(
➡ page 25)
≥ Sets the auto preset memory
(APM) mode. (
➡ page 23)
[OPEN]
≥
Opens the front panel.
(
➡ page 21)
[ '] (Release)
≥ Releases the front panel.
(
➡ page 52)
MUTE
(Indicates
. )
≥ Lowers the volume.
(
➡ page 21)
Dot display
(Indicates .)
≥ Changes the display.
(
➡ pages 22, 25, 29)
≥ Returns to the previous
display.
DISPLAY
Note:
≥
Press the Spectrum Analyzer display to active the
cursor of the touch panel
on
VOL
CQ-DF802W
MENU
OPEN
BAND
APM/ ; / 1
MOSFET 50W X 4
Display ( ➡ next page)
on
Source display (Indicates .)
• Switches off the power. ( ➡ page 20)
(Press and hold.)
• Selects a source. ( ➡ page 20)
≥ Radio
( )
≥ CD player mode
≥ CD changer control
SOURCE
Spectrum Analyzer (S·A) display ( ➡ page 36)
≥ Clock basics ( ➡ page 21)
, (Minute)
≥ Radio mode ( ➡ page 22)
(Preset)
• Enters a preset memory mode. ( ➡ page 23)
≥ CD player mode ( ➡ page 24)
(Track)
≥ CD changer control ( ➡ page 28)
(Track),
≥ Menu setting mode
• Returns to the previous display.
• Determines an operation or item in menu set-
ting mode.
Cursors
(Hour/minute/preset/disc/menu/submenu)
≥ Selects (vertically) or adjusts an operation or
item.
≥ Adjusts the clock. ( ➡ page 21)
≥ Selects a preset memory. ( ➡ page 23)
≥ Selects disc. ( ➡ page 28)
(Tune/track/setting)
≥ Selects (horizontally) or adjusts an operation or
item.
≥ Selects or searches frequency/track.
(
➡ pages 22, 25, 28)
or
or
Disc slot
≥
Loading the disc. ( ➡ page 24)
[<] (Eject)
≥
Ejects the disc. ( ➡ page 24)
MUTE
Touch panel
≥
Switches on the power.
(
➡ page 20)
Remote control sensor
Note:
≥
Operations can be performed no
matter which part of the touch
panel is pressed BUT ONLY
WHEN THE POWER IS ON.
§ The brightness of the screen illustrations in this manual is different from the actual screen brightness.
≥ AUX-IN setting
≥ Menu setting mode
• Returns to the previous display in
menu setting mode.
or
.