Panasonic WV-NP244 - Manual (Page 17)

17
About the operation window
q [Live] button
Click this button to display the "Live" page.
w [Basic setup] button
Click this button to display the "Basic setup" page.
The basic settings such as time and date and cam-
era name, and the settings relating to the NTP serv-
er and the SD memory card can be configured on
the "Basic setup" page. Refer to page 19 for further
information.
e [Camera setup] button
Click this button to display the "Camera setup" page.
The settings relating to image from the camera such
as image quality and brightness, and the settings
relating to audio can be configured on the "Camera
setup" page. Refer to page 22 for further informa-
tion.
r [Multi-screen setup] button
Click this button to display the "Multi-screen setup"
page. The cameras to be used for the multi-screen
display can be registered on the "Multi-screen setup"
page. Refer to page 27 for further information.
t [Alarm setup] button
Click this button to display the "Alarm setup" page.
The settings relating to alarm occurrences such as
settings for the alarm action at an alarm occurrence,
the alarm occurrence notification, and the VMD area
settings can be configured on the "Alarm setup"
page. Refer to page 28 for further information.
y [Authentication setup] button
Click this button to display the "Authentication setup"
page. The settings relating to the authentication
such as users and PCs restrictions for accessing the
camera can be configured on the "Authentication
setup" page. Refer to page 35 for further informa-
tion.
u [Server setup] button
Click this button to display the "Server setup" page.
The settings relating to the mail server and the FTP
server to which the camera accesses can be config-
ured on the "Server setup" page. Refer to page 37
for further information.
!2 Main area
!1 Status display
area
q [Live] button
w [Basic setup] button
e [Camera setup] button
r [Multi-screen setup] button
t [Alarm setup] button
y [Authentication setup]
button
u [Server setup] button
i [Network setup] button
o [Maintenance] button
!0 [Help] button