Panasonic WV-NP244 - Manual (Page 5)

5
About the "Live" page
q [Live] button
Click this button to display the "Live" page. Refer to
page 7 for descriptions of how to operate the "Live"
page.
w [Setup] button (*1)
Click this button to display the setup menu.
e Multi-screen buttons
Click the desired multi-screen (1-4 or 5-8) button to
display images on a multi-screen.
r Image type buttons
Click the desired button to change the image type to
be displayed. The selected button will turn green.
t Image capture size buttons
These buttons will be displayed only when a JPEG
image is displayed. Click the desired button to dis-
play image with the desired image capture size. The
selected button will turn green.
y ZOOM buttons (*2)
Click the desire button to zoom in/out the displayed
image. To return the zoomed image to the original
size, click the [1] button.
u Brightness buttons (*2)
Adjust the brightness of images.
i AUX buttons (*2)
Click the desired button to open/close the AUX con-
nector.
o Camera name
The set camera name will be displayed.
!0 Alarm occurrence indication button (*2)
This button will be displayed and will blink when an
alarm occurred. When the button is clicked, the but-
ton will disappear. When "Latch" is selected for
"Alarm output setup", the alarm output connector will
be reset by clicking this button. (
☞ page 30)
q [Live] button
r Image type buttons
t Image capture size buttons
o Camera name
y Zoom buttons
u Brightness buttons
i AUX buttons
!3 Time and date
!0 Alarm occurrence indication button
!1 Audio button
!2 One shot button
!4 Main area
w Setup button
e Multi-screen buttons